Vista QTVI08L Installation And User Manual page 23

① Multiscreen Display : Changing the display mode
② PTZ Camera Selection
③ Set Preset
④ Call Preset
⑤ Pan/Tilt Mode : It is changed to the Pan/Tilt Mode.
⑥ Zoom/Focus Mode : It is changed to the Zoom/Focus Mode.
⑦ Pan Left / Focus Near
⑧ Pan Right / Focus Far
⑨ Tilt Up / Zoom In
⑩ Tilt Down / Zoom Out
⑪ Camera Dome Menu
[ Camera selection ]
The PTZ cameras can be controlled in either full screen or split screen mode.
If in split screen mode press the PTZ Camera Selection button(②), the PTZ camera icon
will step from one camera to the next on the split screen.
[ Pan and Tilt control ]
Press the Pan/Tilt Mode button(⑤) to enter the Pan/Tilt mode.
To move the dome use the arrows buttons;
Left(⑦) : Pan left, Right(⑧) : Pan right, Up(⑨) : Tilt up, Down(⑩) : Tilt down
[ Zoom and Focus control ]
Press the Zoom/Focus Mode button(⑥) to enter the Zoom/Focus mode.
To zoom or focus use the arrows buttons;
Left(⑦) : Focus near, Right(⑧) : Focus far, Up(⑨) : Zoom in, Down(⑩) : Zoom out
[ Preset positions ]
1. To store a preset position, move the camera to the required position.
2. Press the Set Preset button(③), the popup window will appear.
3. Enter the preset number to be stored then press OK.
[ Call Preset ]
1. To recall a preset position press the Call Preset button(④), the popup window will appear.
2. Enter the preset number you want then press OK.
QTVI Manual V2.0
QTVI installation and user manual
23