Set the alarm display mode after setting the motion or audio popup.
- Alarm Display mode : Select the displayed mode(Full/Split screen) when the motion/audio
- Alarm Display Freeze : It allows to show the still image of the moment that the motion/
1-6. Camera Status
Select which cameras will be connected.
Any cameras not connected will not be able to record.
1-7. Picture Setting
The picture quality displayed on the monitor can be adjusted.
Use UP() / DOWN() buttons to select the cell to be altered, then press the SELECT
button, then use the direction buttons(//
NOTE : In order to save any modified setting value, press "Apply" button.
QTVI Manual V2.0
QTVI installation and user manual
event occurs.
audio event occurs.
◀/ ▶)
to change the values.
29