2. Monitoring
2-1. OSD Description
The Status Bar on screen shows HDD capacity, network connection, current time, etc.
①
① HDD capacity : Used capacity / Total capacity
② Multiscreen Display Button : Single/4 way/9 way/16 way split
③ USB memory connection
④ Mouse connection
⑤ Network connection : It is shown that admin or user is connected.
⑥ Archiving
⑦ Current Date/Time
2-2. Select Channel
Use the Multiscreen display button (
[Single Display]
Also you can use the DIS button on the remote controller to change the display mode.
Display switches in the following order when the DIS button is pressed.
Single channel 4 channel 9 channel 16 channel(QTVI16L only) Single channel
QTVI Manual V2.0
QTVI installation and user manual
) on the popup menu to select the display mode.
[4way split Display]
⑤
③ ④ ⑥
②
[9way split Display]
18
⑦
[16way split Display]