Confidential
Pre-assembly of the MICR Unit
Note:
Perform the following 16 steps only if your printer has a MICR unit.
1. Solder the MICR connector assembly lead wires to the MICR head.
2. Align the MICR frame and MICR head with the nib and attach with one screw.
Rev.D
786
MICR connector assembly
793
Screw (C.P.(S-P2), 2.5X5)
Figure 2-8
TM-U675/U675P (with autocutter) Service Manual
782 MICR assembly
792 MICR frame assembly
Assembly and Disassembly 2-9