Epson TM-U675 Service Manual page 97

Confidential
22. Attach the validation detector assembly to the slip guide lower frame with one screw.
Note:
The parts used and the shape of the slip guide lower frame will vary based on the specifications. Use
only the one that matches your configuration.
23. Attach the validation stopper and validation stopper spring to the slip guide lower frame.
24. Hook the cable line of the slip B.O.F. detector assembly to the slip guide lower frame.
Slip guide lower frame
Rev.D
662
673
Figure 2-63
TM-U675/U675P (with autocutter) Service Manual
672 Validation stopper
697
Validation detector assembly
609
Screw (C.B.P-tite, 3X6)
696
Slip B.O.F. detector assembly
673
Validation stopper spring
662
672
Assembly and Disassembly 2-63