Pre-Assembly Of The Slip B.o.f. Detector Assembly - Epson TM-U675 Service Manual

Confidential

Pre-assembly of the Slip B.O.F. Detector Assembly

1. Solder lead wires C, D, E to the slip B. O. F. detector assembly.
2. Insert the slip B. O. F. detector assembly into the slip insertion detector holder.
Rev.D
TM-U675/U675P (with autocutter) Service Manual
606 Slip insertion detector holder
696 Slip B.O.F. detector assembly
742 Lead wire (type C)
743 Lead wire (type D)
744 Lead wire (type E)
Figure 2-2
Assembly and Disassembly 2-3