Procedures For Replacing The Print Head Unit; Removing The Ribbon Cartridge; Pulling The Cable Connector Out; Arranging The Cable Wires - Epson TM-U675 Service Manual

Confidential

Procedures for Replacing the Print Head Unit

1. Turn off the power switch to the printer. Remove the power supply unit from the printer.
2. Open the printer front cover and remove the ribbon cartridge.
3. Pull the cable connector out of the slit in the case.
When you are reattaching the cable, arrange the cable wires as shown below.
Rev.D
Figure 1-5 Removing the ribbon cartridge
Figure 1-6 Pulling the cable connector out
Figure 1-7 Arranging the cable wires
TM-U675/U675P (with autocutter) Service Manual
Troubleshooting 1-15