Confidential
Installing the Ribbon Cassette
To install the ribbon cassette for the first time or to replace a used ribbon, follow the steps below:
Note:
Be sure to turn on the power before installing a ribbon cassette.
1. Unpack the ribbon cassette and turn the knob in the direction shown to take up any slack.
2. Open the front cover of the printer, using the tabs on each side of the cover.
3. Remove the old ribbon, if there is one.
Appendix I-8 Printer Handling
Figure I-12 Turning the knob
tab
Figure I-13 Opening the front cover
knob
Rev.D