Confidential
Assembly of the Mechanism
1. Tighten two screws on the front of the main frame.
2. Attach the lever drive motor assembly to the main frame with two screws. Install so that the
label side of the lever drive assembly motor is facing the back.
Screw (C.B., 2.6X4)
726
Screw (C.B.S-tite F, 3X6)
Rev.D
773
Figure 2-55
TM-U675/U675P (with autocutter) Service Manual
686 Lever drive motor assembly
Main frame
726
Screw (C.B.S-tite F, 3X6)
Assembly and Disassembly 2-55