Confidential
7. The following message prints on the roll paper (receipt side) and the SLIP LED flashes.
**** RECOGNITION MODE ****
Please set check.
8. Insert the cleaning sheet into the printer in the same way as a check.
CAUTION:
Insert the cleaning sheet in the correct direction.
9. After the cleaning sheet is ejected, press the RELEASE button once and remove the sheet.
CAUTION:
Do not reuse cleaning sheets.
10. Turn OFF the power supply to the printer.
When Cleaning in the Command Mode
1. Execute the MICR cleaning command FS c.
2. Insert the cleaning sheet into the printer in the same way as a check.
CAUTION:
Insert the cleaning sheet in the correct direction.
3. After the cleaning sheet is ejected, press the RELEASE button once and remove the sheet.
CAUTION:
Do not reuse cleaning sheets.
Appendix B-4 Maintenance
Rev.D