Features Menu - CAME FA40230 Installation Manual

Features menu

F 1 (Total Stop 1-2) - N.C. input: gate stop with consequent exclusion of possible automatic closing cycle; to restore movement act on the command
device. Insert safety device on [1-C2]; if unused, select function "0.
= 0 = Deactivated (default); 1 = activated
F i
ENTER
ENTER
F 2 (2-CX input): NC safety contact with possibility to associate the following functions: C1 (reopen when closing), (reclose when opening), C3 (partial
stop;), C4 (obstacle stand-by), C7 (reopen when closing, for sensitive safety edges), (reclose when opening, for sensitive safety edges) or deactivated,
see safety devices in electrical connections.
= 0 = Deactivated (default); 1 = C1; 2 = C2;
F i
ENTER >
F 3 (2-CY input): NC safety contact with possibility to associate the following functions: C1 (reopen when closing), (reclose when opening), C3 (partial
stop;), C4 (obstacle stand-by), C7 (reopen when closing, for sensitive safety edges), (reclose when opening, for sensitive safety edges) or deactivated,
see safety devices in electrical connections.
= 0 = Deactivated (default); 1 = C1; 2 = C2;
F i
ENTER >...>
F 5 (Safety test): allows the card to check the efficiency of safety devices (i.e. photocells) after every opening or closing command.
= 0 = Deactivated (default); 1 = CX; 2 = CY; 3 = CX+CY
F i
>...>
ENTER
F 6 (Maintained action): the gate works by keeping the button pressed (a 2-3 button for opening, a 2-4 button for closing). This excludes all of the
other command devices including the radio command.
0 = Deactivated (default); 1 = activated.
F i
ENTER
>...>
0
>
3 = C3; 4 = C4; 7 = C7; 8 = C8.
F 2
ENTER
>
3 = C3; 4 = C4; 7 = C7; 8 = C8.
F 3
ENTER
>
0
F 5
ENTER
F 6 0
ENTER
i
>
0
i
>
8
>
0 i
>
8
>
i
>
>
i
>
2
>
>
7
4
>
2
> >
7 4
>
2
>
>
3
>
3
>
3
>