Calibrating Travel - CAME FA40230 Installation Manual

Calibrating travel

N.B.: before calibrating the travel, check that the manoeuvring area is free of any obstacles and check for the presence of any mechanical
opening and closing strike-plates.
Important! While calibrating, all safety devices will be deactivated until calibration is complete, except for the TOTAL STOP.
Select A 3.
Press ENTER to confirm.
1) Select 1 and press ENTER to confirm the
automatic-calibration-of-travel mode...
The leaf of the first motor will perform a closing
manoeuvre until it reaches the strike plate.
...consequently, the leaf of the second motor will
perform the same manoeuvre...
...then the second motor's leaf, will open comple-
tely until the end-strike...
... the leaf of the first motor will perform the same
manoeuvre.
a 3
ESC < > ENTER
i
ESC SC SC SC < < < < > > > > ENTER EN EN
c l i
ESC < > ENTER
c l 2
ESC < > ENTER
o p 2
ESC < > ENTER
o p I
ESC < > ENTER
M1
M1
M1
M1
M2
M2
M2
M2