After making the electrical connections and necessary programming, fi t the cover onto the gearmotor and fasten it . Close the hatch Ž, block the
gearmotor using the key and fi t the protective cap .
Note: when fi tting the cover, be careful with the cable connecting the FA001 card to the electronic card.
Manual release override and blocking of the gearmotor
RELEASE - Remove the protective cap from the lock Œ . Insert the trilobe key and turn it anti-
clockwise . Open the hatch and activate the release override lever Ž .
1
BLOCK - Close the release override hatch . Insert the trilobe key and turn it clockwise . Insert the
protective cap .
1
2
4
3
3
5
6
2
5
4