Programming
Memorising data
To register, edit or remove users or command the operator via radio transmitter, plug in the AF43S card.
If using either the transponder of card reader, fit the R700 board or, alternatively, the R800 keypad selector board.
Fit the memory roll to save and load registered users onto another board.
24V 12V 0
AF
TOP
Description of programming commands
The ESC button is for:
- exiting menus;
- cancelling any changes.
moving from one menu item to another;
- increasing or decreasing values.
U V W X Y E
L1T L2T CT
L
AF card
ATOMO
TAM
F
{
ESC
<
The <> keys are for:
{
N
R700 card
R700
CANCELLI AUTOMATICI
R800
CANCELLI AUTOMATICI
R800 board
Memory roll
TWIN
TOUCH
I
Display
{
T
he ENTER button is for:
>
ENTER
- accessing the menus;
- confirm and memorise the set value.
LT001
TSP00
S7000
S6000