Photocells - CAME FA40230 Installation Manual

Electrical connection for operating the photocell's safety test
DELTA
10 11 ES TS 1 2 3 3P 4 5 7 CX CY
With each opening and closing command, the card checks the effi ciency of the safety devices (i.e. photocells). Any anomalies in the working of the
photocells is fl agged on the electrical card, and this cancels any commands from the radio transmitters or buttons.
Electrical connection to work the photocells safety test:
- the transmitter and receiver, must connected as shown in the diagram:
- select from the F5 feature which inputs the test should be activated on.
Settings and adjustments
L2T 1 2 3 4
0 12 24
24V 12V 0
L1T
U V W X Y E L1T L2T CT L
DIR / DELTA S
10 11 ES TS 1 2 3 3P 4 5 7 CX CY
To vary the motor torque, move the faston shown to
one of the four positions; 1 min ÷ 4 max.
N