Backup Heater; To Unpack The Backup Heater; To Remove The Accessories From The Backup Heater; About The Units And Options - Daikin EBLQ05+07CAV3 Installer's Reference Manual

3.5

Backup heater

3.5.1

To unpack the backup heater

1
2
3.5.2 To remove the accessories from the
backup heater
1 Remove the wall bracket that is attached to the backside of the
backup heater.
4

About the units and options

4.1 Overview: About the units and
options
This chapter contains information about:
▪ Identifying the outdoor unit
▪ Identifying the control box
▪ Identifying the backup heater
▪ Combining the outdoor unit with options
EBLQ05+07CAV3 + EDLQ05+07CAV3 + EKCB07CAV3 +
EK2CB07CAV3 + EKMBUHCA3V3 + EKMBUHCA9W1
Daikin Altherma low temperature monobloc
4P405544-1 – 2015.03
4 About the units and options
▪ Combining the control box with options
▪ Possible combinations of outdoor unit and control box
4.2

Identification

NOTICE
When installing or servicing several units at the same time,
make sure NOT to switch the service panels between
different models.
4.2.1

Identification label: Outdoor unit

Location
Model identification
Example: E B/D L Q 05 CA V3
Code
E Monobloc outdoor heat pump
B Reversible (heating+cooling)
D Heating only
L Low water temperature – ambient zone: −10~
−25°C
Q Refrigerant R410A
05 Capacity class
CA Model series
V3 Power supply
4.2.2

Identification label: Control box

Location
Model identification
Example: EK CB 07 CA V3
Code
EK European kit
CB Control box
07 Capacity class
CA Model series
V3 Power supply
4.2.3

Identification label: Option box

Location
Explanation
Description
Installer reference guide
9