Format General Safety instructions that Paper (in the box of the safety you must read before outdoor unit) precautions installing Connectors for interconnection cable between the option box and control box EKCB07CAV3. Outdoor unit Installation instructions Paper (in the box of the installation outdoor unit) manual Control box Installation instructions Paper (in the box of the installation control box) manual Option box Installation instructions Paper (in the box of the installation option box) manual Backup Installation instructions Paper (in the box of the heater backup heater) installation manual Installation manual EK2CB07CAV3 Daikin Altherma low temperature monobloc option box 4P4055461 – 2015.03...
318 mm ON/OFF output Changeover to external 3 Drill 4 holes and install 4 plugs (suitable for M5). heat source 4 Put the screws in the top plugs and hang the box on the Cable section 2.5 mm². screws. Minimum cable section 0.75 mm². 5 Put the screws in the bottom plugs. NOTICE 6 Fix the 4 screws firmly. More technical specifications of the different connections are indicated on the inside of the option box. EK2CB07CAV3 Installation manual Daikin Altherma low temperature monobloc option box 4P4055461 – 2015.03...
Page 4
1 Connect the electrical meters cable to the appropriate terminals as shown in the illustration below. NOTICE The distance between the high voltage and low voltage cables should be at least 25 mm. 4.3.3 To connect the option box power supply 1 Connect option box terminal X1M to control box terminal X1M. S5P S6P 2 Fix the cable with cable ties to the cable tie mountings. 2 Fix the cable with cable ties to the cable tie mountings to ensure strain relief and to make sure that it does NOT come in contact with sharp edges. Installation manual EK2CB07CAV3 Daikin Altherma low temperature monobloc option box 4P4055461 – 2015.03...
2 Fix the cable with cable ties to the cable tie mountings. 4.3.7 To connect the alarm output 1 Connect the alarm output cable to the appropriate terminals as shown in the illustration below. 2 Fix the cable with cable ties to the cable tie mountings. Starting up the system For instructions on how to configure and commission the system, and hand it over to the user, refer to the installation manual of the outdoor unit. 2 Fix the cable with cable ties to the cable tie mountings. EK2CB07CAV3 Installation manual Daikin Altherma low temperature monobloc option box 4P4055461 – 2015.03...