Cleaning The Spray Arms - Miele G 7825 Operating Instructions Manual

Spray arms in the
wash cabinet:
Spray arms on
wash carts/
modules:

Cleaning the spray arms

It is possible for spray arm jets to become blocked by particles inside
them.
Therefore, it is important to inspect the spray arms every day.
Use a sharp, pointed object to push any particles into the spray arm

jets, then rinse thoroughly under running water.
Remove the spray arms as follows:
Remove wash cart.

Loosen the fastening on the spray arm with an SW 60 spanner and

pull the spray arm upwards or downwards to remove.
Turn the nut (left hand thread) together with the spray arm

clockwise and then pull the spray arm downwards and off.
If there is considerable visible wear on the bearing on the spray arm,
contact Miele Service as this can result in functional problems.
After cleaning the spray arms screw them back into position.

After replacing the spray arms, check that they rotate freely.
Maintenance
53