Dispensing liquid detergents and neutralizer
OXIVARIO
38
Dispensing systems
Use only detergents and neutralizers specially designed for
washer-disinfectors, and observe the manufacturer's
recommendations for use! Please observe carefully any instructions
relating to toxic residues. It is recommended to use tested Miele
process chemicals only. For suitable process chemicals contact
Miele Professional.
The washer is equipped as standard with two dispensing pumps:
– Dispensing system DOS 1 (blue) for dispensing liquid detergents.
The dosing rate is 120 ml/min.
– Dispensing system DOS 3 (red) for dispensing acidic processing
chemicals, such as neutralizers or rinsing agents. The dosing rate is
20 ml/min.
Additional DOS pumps (optional):
– Dispensing system DOS 2 (white) for dispensing acidic processing
chemicals, such as neutralizers or lubricants. The dosing rate is 20
ml/min.
– Dispensing system DOS 4 (green) for dispensing low-foam, washer-
compatible disinfection agents or an additional detergent. The
dosing rate is 120 ml/min.
Depending on the application(s) chosen for this washer-disinfector,
the appropriate amounts of liquid processing chemicals are
dispensed through these systems.
If a dispensing system is to dispense different process chemicals,
the change of chemicals must be carried out by Miele Service
Department.
Optional feature
Further information regarding the OXIVARIO process and how to
connect the container with H
"Optional feature - OXIVARIO".
This washer-disinfector can be set up or retro-fitted to use the
OXIVARIO process by adding an additional dispensing pump and a
special buffer tank for hydrogen peroxide (H
solution hose is colour coded black.
The DOS 2 dispenser is used for the H
O
solution, see the section on
2
2
O
solution). The H
2
2
O
solution.
2
2
O
2
2