Application Technology; General Information; Before Starting A Program; At The End Of Each Program - Miele G 7825 Operating Instructions Manual

Before Starting a
program
At the End of
each program

Protein test

General information

The washer-disinfector can be fitted with various wash carts, adapted
to the type and shape of the items that need to be cleaned and
disinfected; they can be equipped with a wide variety of modules and
inserts.
Wash carts, baskets and inserts should be properly selected to
match the application involved.
Notes on the individual areas of application and examples of loading
are given on the following pages.
you should carry out a visual check on the following before every
program start:
– Are the items properly sorted, loaded and connected in the washer-
disinfector?
– Are the spray arms clean, and can they rotate freely?
– Is the filter combination free of coarse debris?
Remove any coarse material and clean the filters if necessary.
– Is the wash cart correctly connected to the water supply?
– Are the removable modules, jets, sleeves and other rinsing
attachments correctly connected?
– Are all chemical containers sufficiently filled?
The following must be checked at the end of every program:
– Carry out a visual check of the load for cleanliness.
– Check that all hollow shafted instruments are still securely located
on their jets.
 Any hollow instruments that have become disconnected from
their adapters during reprocessing must be re-processed.
– Check that the lumen of hollow instruments are free of obstruction.
– Check that jets and connectors are securely held in position in the
baskets or inserts.
Cleaning results should be subjected to periodic protein tests, e.g.
with the Miele test kit or the Miele ProCare Protein Check. Cleaning
verification shall be carried out weekly in accordance with "CSA
Z314.8 Decontamination of reusable medical devices."

Application technology

19