Automatic Program Recognition (Option) - Miele G 7825 Operating Instructions Manual

Automatic program recognition (option)

18
Automatic program recognition
The automatic program recognition feature assigns a program place
to a wash cart. For this to work, the wash carts must be coded with a
magnetic strip (via a bit combination).
In operating level C, the only program available for a coded wash cart
is the one assigned to the corresponding program place.
When a coded wash cart is inserted into the washer-disinfector and
the door closes, the automatic program recognition system will select
the assigned program.
The processes for coding the wash cart and for changing program
places are described in the Programming manual for the washer-
disinfector.
 Make sure that no small metallic objects or instrument parts are
stuck to the magnetic strip, in particular to the underside of it.
Any metallic objects on the strip can result in the coding being
incorrectly read.
Bit 6 is not a part of the modifiable magnetic strip. Note that wash
carts with side coupling must be coded with magnetic strips that
have Bit 6 set to I.
Wash carts without side coupling must be coded with magnetic
strips that do not contain Bit 6.
The magnetic strips in G 7824 / G 7825 / G 7826 washer
disinfectors must contain grey magnets.