Interrupting A Program - Miele G 7825 Operating Instructions Manual

In operating level
B or D

Interrupting a program

A program can only be interrupted or cancelled in operating levels
B and D.
If a disinfection program has been interrupted and then continued,
be sure to check the display upon program completion. If the
message PROCESS PARAMETERS NOT MET appears, the door
has been opened after the disinfection, hence the disinfection
parameters are not met. Repeat the program if necessary.
If the door must be opened for urgent reasons, e. g., if items are
moving around too much, or the cleaning performance needs to be
checked:
Press the Stop button .

The program is interrupted.
The following will appear in the display:
CANCEL OR>CONTINUE<
Open the door .

For pass-through machines:
The setting at Machine function/Door interlock determines which
door of the washer-disinfector can be opened, see Programming
manual.
The door on the unclean side can always be opened, regardless of
the setting.
The door on the clean side can then only be opened when the
machine is set to INTERLOCK YES.
When using the washer-disinfector as a medical device (as per EN
ISO 15883, CAN/CSA Z.15883), INTERLOCK NO should always be
configured.
 Caution. Water and items in the machine may be hot.
There is the danger of burning or scalding.
In programs with thermochemical disinfection, steam containing
high levels of disinfectant can escape!
Rearrange the load.

Follow infection control regulations and wear protective gloves.
Close the door.

Press the Start button .

The program continues.
Operation
47