Starting A Program - Miele G 7825 Operating Instructions Manual

Operation
A: Pre-set
programs
B: Open program
selection
1. Program selector
2.  and 
buttons
44

Starting a program

You can find detailed and important information regarding the Miele
default programs in the program overview chart in the
accompanying Programming Manual.
 Any program or dosing changes in connection with the
preparation of medical devices must be documented in a log book.
Preset programs can be compiled in operating levels B or D once and
cleared for operating level A (see Programming Manual/System
function - Programs under "A" free access).
Check the display to see whether the required program is being

displayed.
If several pre-set programs are being compiled and cleared, use the
program selector to choose a particular one.
Press the Start button .

Further information about program selection can be found in the
Programming manual in "Operating level A".
In operating level B, you have three ways to select a program:
1. Program slots 1 - 23 can be selected using the program selector.
2. Programs 24 and above are accessible via  and .
3. The program chart lists all stored programs.
Turn the program selector to the desired program number.

The program name appears in the display.
Press the Start button .

The programme will run.
Turn the program selector to 24.

From program 24 upwards:

Press  (scrolls forwards) until the required program is shown.
From program 64 downwards:

Press  (scrolls backwards) until the required program is shown.
Press the Start button .

The program will run.