Setting Independent Key Transition Wipe Modifiers - Sony MVS-8000 User Manual

1
In the Key1 Wipe Adjust menu, select [Pattern Select].
The Pattern Select menu appears.
2
Press the button for the desired pattern.

Setting Independent Key Transition Wipe Modifiers

Available modifiers
You can use the following modifiers with an independent key transition wipe.
Note that the available modifiers may depend on the pattern you are using.
• Direction
• Edge
• Positioner
• Rotation
• Aspect ratio
• Pattern replication
Setting the wipe direction (Direction)
In the <Direction> group of the Key1 Wipe Adjust menu, make any of the
following selections.
Normal: regular direction
Normal/Reverse: alternate between regular and reverse for each transition
Reverse: reverse direction to normal
Softening the wipe pattern edge (Soft edge)
Use the following procedure.
1
Press [Soft] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameter.
Knob
1
Setting the wipe position (Positioner)
There are two methods of setting the wipe position: using the device control
block, or in a menu.
Parameter Adjustment
Soft Edge softness
Setting values
0.00 to 100.00
Wipe Settings for Independent Key Transitions
391