Basic Menu Operations; Menu Organization - Sony MVS-8000 User Manual

Basic Menu Operations

Menu Organization

Operations on the MVS-8000 switcher
system make frequent use of menu
operations.
This section describes the menus and their
interrelationships.
Overview
All detailed settings for basic operations
such as transitions, keys, DME, or wipes,
are made in menus. There are also menus
for carrying out general system control,
managing setting data, and initial setup.
Accessing menus
You can use any of the following methods
to access a menu, and the initially displayed
menu page depends on the method used.
• Pressing a top menu selection button in
the menu control block.
This displays the page you last accessed
in the particular menu. After initially
powering on the system, however, the
page of VF1 - HF1 of the particular menu
is always selected.
• Pressing a top menu selection button in
the menu control block twice in rapid
succession.
The page of VF1 - HF1 of the particular
menu is displayed.
• Pressing a button other than a top menu
button twice in rapid succession (see
page 269).
Depending on the button, this may
display a fixed page or the page selected
last time you accessed the menu.
• Press the menu page selection button at
the top left of the menu display.
The top menu window appears; press the
top menu selection button for the
particular menu, or enter the menu
number with the numeric keypad, and
press the Enter button.
For details of the VF buttons and HF
buttons, see "Interpreting the Menu
Screen" (page 273).

Basic Menu Operations

267