Signal Name Display - Sony MVS-8000 User Manual

Button
From the left end to the 31st
button
Reentry buttons

Signal Name Display

You can attach a name (source name) to each signal assigned to a cross-point
button, with a maximum of 16 characters.
• The source name displays in the cross-point control block and auxiliary bus
control block show the source names of the video signals assigned to
numbers 1 to 31.
• To display the source names for numbers 32 to 62, press the [SHIFT] button
to the right of the source name displays.
• To display the source names of the key signals assigned to buttons, hold
down the [SPLIT] button in the key control block or the [KEY] button in the
auxiliary bus control block.
Colors of lit cross-point buttons
In a particular row of cross-point buttons, only the last pressed button is
effective, and lights amber or red. The amber indicates the "low tally" state,
and the red indicates the "high tally" state, to indicate whether or not the
selected signal appears in the final output video.
Color
Amber
Red
Auxiliary bus control block button numbers ([2ND] button lit)
Number when the shift
button is not pressed
1 to 31
121 to 124
Significance of colors of lit cross-point buttons
State
Low tally
High tally
Number when the shift
button is pressed
32 to 62
125 to 128
Significance
Does not appear in final output video
Appears in final output video
Signal Selection
31