Basic Procedure For Wipe Settings; Wipe Settings Menu; Wipe Pattern Selection - Sony MVS-8000 User Manual

Basic Procedure for Wipe Settings

You carry out wipe setting operations principally using the Wipe menu for each
of the M/E-1 to M/E-3 and PGM/PST banks.
This section describes the basic procedures for wipe settings, taking the M/E-
1> Wipe menu as an example.
For details of independent key transition wipe settings, see "Wipe Settings for
Independent Key Transitions" (page 390).

Wipe Settings Menu

Accessing the wipe settings menu
To access the M/E-1> Wipe menu, use any of the following operations.
• In the menu control block, select the top menu selection button [M/E 1], and
• In the transition control block of the M/E-1 bank, press the transition type
• In the Flexi Pad control block of the M/E-1 bank, press the [WIPE] button
Any of the above operations displays the M/E-1>Wipe menu.

Wipe Pattern Selection

You can select a wipe pattern in the Wipe menu, or by entering a pattern
number from the Flexi Pad control block.
For how to use the Flexi Pad control block, see "Selecting a wipe pattern in
the Flexi Pad control block" (page 374).
Selecting a wipe pattern by a menu operation
Use the following procedure.
1
2
372

Basic Procedure for Wipe Settings

press VF5 'Wipe.'
selection button [WIPE] twice in rapid succession.
twice in rapid succession.
In the M/E-1>Wipe menu, select HF1 'Main Pattern.'
The Main Pattern menu appears.
Select the wipe pattern group with the pattern group selection button.