The relationship between the positions of the two fader levers and the image
output in a mix is as follows.
Left lever position Right lever
Top
Bottom
Top
Bottom
Center
• When the transition type is NAM, the outputs of the A bus and B bus in the
above table are the outputs subjected to NAM.
• The transition indicators always show the progress of the background A bus.
• The operation of the left lever and that of the right lever can be swapped. (See
"Operation Settings (Operation Menu)" in Chapter 16 (Volume 2).)
Independent Key Transitions With a Simple Transition
Module
You carry out independent key transition operations using the independent key
transition control block (simple type). This controls only keys 3 and 4.
A bus output
position
Top
100%
Top
100%
Bottom
0%
Bottom
0%
Center
50%
B bus output
0%
100%
0%
100%
50%
321
Simple Transition