Sony MVS-8000 User Manual page 414

The following transition modes are available.
Channels
One-channel mode
Two-channel mode
a) Transition according to DME wipe patterns 1202, 1203, or 1204
b) Transition according to DME wipe pattern 1201
c) Transition according to DME wipe pattern 1251
For details, see "DME Wipes" (page 68).
Notes on creating keyframe effects
When creating a keyframe effect to be used as a user programmable DME
pattern, note the following, depending on the transition mode used.
Notes on single transition mode (one-channel mode)
• Either create the first keyframe image outside the screen area, or set the
• Create the last keyframe to be a full-size image.
• In the <Transition Mode> group of the Key Frame>DME User PGM menu,
Notes on flip tumble (one-channel mode)
• Create the first keyframe image at full size. In the <Back> group of the
• Create the last keyframe with the image inverted so the back side is visible,
414
Creating User Programmable DME Patterns
Transition mode
Single transition mode
Flip Tumble
Frame in-out
Frame in-out H
Frame in-out V
Picture-in-picture
Compress
Dual transition mode
Two-channel picture-in-picture
image size to zero so that it cannot be seen within the screen.
select [Single].
DME>Input/Output>Video/Key menu, depending on the direction of the
rotation you want during the transition, press [H Invert] or [V Invert], turning
it on.
and with the size at full size.
Effect group
Slide
Split
Door
Page turn
Page roll
Squeeze
Flip Tumble
Frame in-out
a) Frame in-out
Frame in-out
b) Picture-in-picture
c) Picture-in-picture
Slide
Squeeze
Picture-in-picture