Further Options; Front Vga Module - Fujitsu PRIMERGY RX100 S6 Options Manual

8

Further options

V
CAUTION!
Follow the safety instructions in
8.1

Front VGA module

I
There is only one 3.5-inch bay. You can install either a LSP or a Front
VGA module.
Ê Open the server as described in the
Ê Remove the dummy module as described on
Figure 38: Connecting cables to the Front VGA module
Ê Thread the two ends of the Front VGA cable through the top bay for
accessible drives (1).
Ê Connect the USB connector (2) and the VGA connector (3) to the connectors
of the Front VGA module.
RX100 S6
chapter "Safety instructions" on page
chapter "Preparation" on page
page
Options Guide
23.
35.
15.
55