Fujitsu PRIMERGY RX100 S6 Options Manual page 44

Installing an expansion card
Figure 23: Attaching the slot cover extension to the expansion card
Ê Attach the slot cover extension to the slot cover of the expansion card (1).
Ê Fasten the slot cover extension with one screw (2).
A
Figure 24: Installing an expansion card -slot 1
Ê Carefully press the expansion card into the riser card slot (A), until it clicks
into place (1).
Make sure that the lug on the slot cover (B) clicks into place in the
corresponding hole (2).
44
B
Options Guide
RX100 S6