Fujitsu PRIMERGY RX100 S6 Options Manual page 42

Installing an expansion card
Riser module 1
Riser module 1 offers slot 1.
Ê Open the server as described in the chapter "Preparation" on page 23.
Figure 20: Removing the riser module 1
Ê Push the green lock bars of the riser module 1 in direction of the arrows (1).
Ê Carefully pull out the riser module 1 upward (2).
Ê Please read the documentation supplied with the expansion card.
42 Options Guide
RX100 S6