Further Options; T-Handles - Fujitsu PRIMERGY RX300 S6 Options Manual

9

Further options

V
CAUTION!
Please note the safety instructions in
page 19
9.1

T-handles

Figure 83: Installing the T-handle
Ê Remove the black pads (1) out of the square hole in the front cover.
Ê Insert the handle from the front side (2).
Ê Tighten the handle with the screw (3) (torque value of 1.8 Nm).
Ê Install the second handle in the same way as the first.
RX300 S6
chapter "Safety instructions" on
Options Guide 105