Fujitsu PRIMERGY RX100 S6 Options Manual page 49

Figure 29: Attaching the mounting bracket to an expansion card
Ê Attach the mounting bracket to the expansion card (1).
Ê Fasten the mounting bracket with two screws (2).
B
Figure 30: Installing an expansion card - slot 3
Ê Fit the hook on the riser card holder (B) into the retaining slot in the mounting
bracket (1).
Ê Carefully press the expansion card into the riser card slot (A), until it clicks
into place (2).
RX100 S6
Installing an expansion card
Options Guide
A
49