Fujitsu PRIMERGY RX100 S6 Options Manual page 38

Installing a LSP
Figure 18: Connecting the LSP cable to the LSP
Ê Thread the LSP cable through the openings (1).
Ê Connect the LSP cable (2) to the LSP (see the cabling plans in the
Appendix).
Figure 19: Connecting the LSP cable to the system board
Ê Plug the LSP cable into the SMBus LSP connector on the system board (see
the cabling plans in the Appendix).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
38
63.
Options Guide
RX100 S6