Fujitsu PRIMERGY RX100 S6 Options Manual page 43

Figure 21: Pulling out the slot cover - riser module 1
Ê Pull out the slot cover frontward (1) and remove it sideward (2).
V
CAUTION!
Keep the slot cover for future use. If the expansion card is removed and
not replaced with a new card, the slot cover must be reinstalled due to
cooling, to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and to protect against fire.
Figure 22: Removing the slot cover extension
Ê Loosen the screw (1) and remove the slot cover extension (2).
RX100 S6
Installing an expansion card
Options Guide 43