During a Conference Call
1. While on a call, press the More softkey at the bottom of the screen once. Then press the
Conf softkey at the bottom of the screen. The party you were speaking to is put on hold, and
you will hear a dial tone (Figure 5-39).
NOTE: To cancel the conference call and return to the original party, press the Cncl softkey at the
bottom of the screen (Figure 5-40).
2. Press the Dir softkey at the bottom of the screen.
3. Select Contact Dir... from the menu (Figure 5-41).
Figure 5-39: Conference Call
Figure 5-40: Conference Destination
Figure 5-41: Contact Directory
44 | P a g e
© Nextiva, All Rights Reserved