Polycom VVX 201 User Manual page 10

NOTE: To enter a period (.), press the * key once. To enter a forward slash (/), press the #
key once (Figure 3-10).
7. Press the Back softkey at the bottom of the screen, and scroll down using the directional
pad until you see Tag SN to UA.
8. Set this option to Enabled (Figure 3-11).
9. Press the Back softkey twice until the Save Config option appears on the screen.
10. Press the Sel softkey at the bottom of the screen to save the configuration. The phone will
reboot, provision and register (Figure 3-12).
Figure 3-10: Special Characters
Figure 3-11: Enable Tag SN to UA
Figure 3-12: Save Config
10 | P a g e
© Nextiva, All Rights Reserved