Making A Second Call - Polycom VVX 201 User Manual

Using a Headset (optional):
1. Press the HEADSET button on the bottom-right of the phone.
2. Dial the phone number or extension of the party you want to call, and press the Send
softkey (Figure 5-3).
3. When finished, press the HEADSET button on the bottom-right of the phone to disconnect
the call.

Making a Second Call

Before attempting to make a second call, you must set up line mirroring using the instructions in the
"Line Mirroring" section. You will not be able to make a second outbound call unless this feature is
setup. After you have initiated a second call, you can press the Line 1 and Line 2 keys to switch back
and forth between the two calls.
Using the Handset:
1. While on a call, press the Line 2 key on the left side of the phone. The first party is
automatically put on hold.
2. Dial the phone number or extension of the party you want to call, and press the Send
softkey at the bottom of the screen. If you dial the full 10 digit number of the party you want
to call, the Polycom VVX 201 phone will automatically start dialing, so pressing the Send
softkey is not necessary (Figure 5-4).
Figure 5-3: Dialed Numbers
Figure 5-4: Dialed Numbers
28 | P a g e
© Nextiva, All Rights Reserved