Bulb Timer - Canon EOS 6D Mark II Instruction Manual

Hide thumbs Also See for EOS 6D Mark II:

Table of Contents

With [z3: Long exp. noise reduction], you can reduce the noise

generated during long exposures (p.197).

For bulb exposures, using a tripod and bulb timer is recommended. You

can also use mirror lockup (p.265) in combination.

You can also shoot bulb exposures by using Remote Switch RS-80N3

(sold separately) or Timer Remote Controller TC-80N3 (sold separately,

You can also use Remote Controller RC-6 (sold separately, p.271) or

Wireless Remote Control BR-E1 (sold separately, p.273) for bulb

exposures. When you press the remote controller's transmit button, the

bulb exposure will start immediately or 2 sec. later. Press the button

again to stop the bulb exposure.

H Bulb TimerN

You can preset the bulb exposure's exposure time. With the bulb timer,

you need not keep holding down the shutter button during the bulb

exposure. This reduces camera shake.

The bulb timer can be set only in the <F> (bulb exposure). It cannot be

set (or will not function) in any other mode.

Select [Bulb timer].

Under the [z4] tab, select [Bulb

timer], then press <0>.

Select [Enable].

Select [Enable], then press the

F: Long (Bulb) Exposures