Table of Contents
Advertisement
Remote Control Shooting
Even if the camera's power is turned off by the auto power off function,
the camera battery will still be consumed with the Bluetooth connection
established.
If you selected [Smartphone] or [Remote] in step 4, you cannot use
infrared remote control units such as Remote Controller RC-6 (sold
separately).
When you do not use the Bluetooth function, setting it to [Disable] in
step 4 is recommended. To use the remote controller again, just select
[Remote] again to automatically reconnect with the camera.
If remote control shooting is enabled, the auto power off will take effect in
approx. 2 min. even if [52: Auto power off] is set to [1 min.].
The remote controller can also be used for movie shooting (p.381).
During shooting, the camera's self-timer/remote control lamp will light up
briefly.
For the Bluetooth connection indicator, refer to "Wi-Fi (Wireless
Communication) Function Instruction Manual" (p.4).
274
Select [Pairing].
5
Select [Pairing], then press <0>.
Press and hold the <W> button and
<T> button on the BR-E1
simultaneously for 3 sec. or more.
Pairing starts.
For instructions after the pairing is
complete, refer to the BR-E1's
Instruction Manual.
When the pairing is complete, the
remote controller will be registered in
the camera and the screen shown on
the left will appear.
Advertisement
Table of Contents
