Table of Contents
Advertisement
Troubleshooting Guide
ISO 100 cannot be set. ISO speed expansion cannot be selected.
If [z3: Highlight tone priority] is set to [Enable], the settable
ISO speed range will be ISO 200 - ISO 40000 (for still photo
shooting). Even if you set [ISO speed range] to expand the
setting range, you cannot select L (equivalent to ISO 50), H1
(equivalent to ISO 51200), or H2 (equivalent to ISO 102400).
When [z3: Highlight tone priority] is set to [Disable] (p.199),
you can set ISO 100/125/160, L, or H1/H2.
Even if I set a decreased exposure compensation,
the image comes out bright.
Set [z2: Auto Lighting Optimizer] to [Disable] (p.194). When
[Low], [Standard], or [High] is set, even if you set a decreased
exposure compensation or flash exposure compensation, the
image may come out bright.
I cannot set the exposure compensation when
both manual exposure and ISO Auto are set.
See page 242 to set the exposure compensation.
Not all the lens aberration correction options are displayed.
During movie shooting, [Distortion correction] or [Diffraction
correction] will not be displayed.
554
Advertisement
Table of Contents
