Canon EOS 6D Mark II Instruction Manual page 136

S Selecting the AF Area and AF Point
Selecting the AF Area Selection Mode
In the <8: y> mode, you cannot select the AF area. Single-point AF
(fixed at center) is applied for shooting.
In Basic Zone modes, any of the following operations will revert the AF
area and AF point settings to the default.
• Changing the shooting mode.
• Setting the power switch to <2>.
• Opening the battery compartment cover or card slot cover.
With [8C.Fn II-8: Select AF area selec. mode], you can limit the
selectable AF area selection modes to only those you want to use
(p.481).
If you set [8C.Fn II-9: AF area selection method] to [1:S9Main
Dial], you can select the AF area selection mode by pressing the <S>
or <B> button, then turning the <6> dial (p.482).
136
Press the <S> or <B> button
1
.
(9)
Look through the viewfinder and
press the <S> or <B> button.
Press the <B> button.
2
Each time you press the <B>
button, the AF area selection mode
changes.