Using The Self-Timer - Canon PowerShot SD780 IS DIGITAL ELPH User Manual

(:10
Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the .... button.
Select
(:10.
Press the ....... buttons to select
C:10,
then
press the
@
button.
Once set, C:10 will appear.
Shoot.
Press the shutter button halfway to focus
on the subject, then press it fully.
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
To restore the original setting, select (:oFF
in Step 2.
You can change the delay time and number of shots (p. 76).
63