Af Point Selection - Canon EOS 6D Mark II Instruction Manual

Hide thumbs Also See for EOS 6D Mark II:

Table of Contents

Selecting the AF Point Manually

You can manually select the AF point or zone.

When you keep holding down the <Q> button and turn the <6> dial,

you can select an AF point in vertical direction.

When [8C.Fn II-11: Initial AF pt,

AF pt selected] (p.484), you can use this method to manually select the

AI Servo AF's initial position.

When you press the <S> or <B> button, the LCD panel displays the

• Single-point Spot AF and Single-point AF: SEL

(Off center)

• Zone AF, Large Zone AF, and Automatic selection AF:

S Selecting the AF Area and AF Point

Press the <S> or <B> button

The AF points will be displayed in the

In the Zone AF mode or Large Zone

AF mode, the selected zone will be

Select an AF point.

The AF point selection will change in

the direction you tilt <9>. If you

press <0>, the center AF point (or

center zone) will be selected.

You can also select a horizontal AF

point by turning the <6> dial and

select a vertical AF point by turning

the <5> dial.

In the Zone AF and Large Zone AF

modes, turning the <6> or <5>

dial will change the zone (in a looping

sequence for Zone AF).

AI Servo AF] is set to [Initial

(Center), SEL AF