Table of Contents
Advertisement
Time required
Playback time
Set the desired number, then press <0>. (Returns to <s>.)
Settable in the range from [00:00:01] to [99:59:59].
Select [OK] to set the shooting interval.
Press <0> to display <r>.
Set the desired number, then press <0>. (Returns to <s>.)
Settable in the range from [0002] to [3600].
Check that [3: Playback time] is not displayed in red.
Select [OK] to set the number of shots.
For cards that can record time-lapse movies (card performance
requirements), see page 343.
If the number of shots is set to 3600, the time-lapse movie will be approx.
2 min. in NTSC and approx. 2 min. 24 sec. in PAL.
Set the shooting interval.
6
Select [Interval].
Check the [k Time required] and
[3: Playback time] displayed at the
bottom of the screen to set the
number.
Select the hour, minute, or second.
Press <0> to display <r>.
Set the number of shots.
7
Select [No. of shots].
Check the [k: Time required and
[3: Playback time] displayed at the
bottom of the screen to set the
number.
Select the digit.
a Shooting Time-lapse Movies
351
Advertisement
Table of Contents
