Table of Contents
Advertisement
Installing and Removing the Card
Removing the Card
Access lamp
UHS-I SDHC or SDXC memory cards can also be used.
The number of possible shots varies depending on the remaining
capacity of the card, the settings of image-recording quality, ISO speed,
etc.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.535).
44
Open the cover.
1
Set the power switch to <2>.
Check that the access lamp is off,
then open the cover.
If [Recording...] is displayed on the
LCD monitor, close the cover.
Remove the card.
2
Gently push in the card, then let it go
to eject.
Pull the card straight out, then close
the cover.
Advertisement
Table of Contents
