Using The Self-Timer - Canon PowerShot SD770 IS DIGITAL ELPH User Manual

Available Shooting Modes
I
~
Using the Self-Timer
~~
»
p.
222
You can set the time delay and the numbers of shots you wish to take
in advance.
10 sec. Self-Timer: shoots 10 seconds after you press the shutter
button.
11 ·
2 seconds before the shutter releases, the self-timer lamp and
sound speed up.
2 sec. Self-Timer: shoots 2 seconds after you press the shutter
button.
III ·
At the same time as the shutter button is pressed, the self-timer
sound beeps rapidly*, the self-timer lamp blinks, and the shutter
releases 2 seconds later.
Custom Timer: you can change the delay time (0-10, 15,20, 30 sec.)
and number of shots (1-10).
.., • When [Delay] is set to 2 or more seconds, the self-timer sound
..,. beeps quickly 2 seconds before the shutter releases*. When
[Shots] is set to more than 1, the self-timer sound only beeps before
the first shot.
* This may differ depending on your My Camera settings (p. 175).
Press the
~
button.
1. Use the
+
or ... button to change
the Self-timer mode.
• Pressing the MENU button while this
screen is displayed will allow you to
set the delay and number
of
shots as
when Custom Timer is selected
(p.65).
Shoot.
• When the shutter button is pressed fully, the self-timer lamp will
blink*.
* When using the flash by setting [Red-Eye Lamp] to [On] in [Flash Settings]
(p. 75), the self-timer lamp will stay lit for the last 2 seconds.
To Cancel the Self-Timer
Press the ~ button and use the
+
or ... button to select
111.