Table of Contents
Advertisement
3 Registering a Picture StyleN
If a Picture Style is already registered under [User Def. *], changing the
base Picture Style in step 4 will clear the parameter settings of the
previously registered User Defined Picture Style.
If you perform [55: Clear all camera settings] (p.75), all the [User
Def. *] settings will revert to their defaults.
To shoot with a registered Picture Style, select the registered
[User Def. *], then shoot.
Regarding the procedure to register a Picture Style file to the camera,
refer to the EOS Utility Instruction Manual (p.596).
184
Select a parameter.
5
Select the parameter (such as
[Strength] under [Sharpness]) to be
set, then press <0>.
Set the parameter.
6
Adjust the effect level of the
parameter, then press <0>. For
details, see "Customizing a Picture
Style" (p.180).
Press the <M> button to register
the adjusted parameter settings. The
Picture Style selection screen will
then reappear.
The base Picture Style will be
indicated on the right of [User Def. *].
If the parameter settings in the
Picture Style registered under [User
Def. *] have been modified from the
default, the Picture Style's name will
be displayed in blue.
Advertisement
Table of Contents
