Table of Contents
Advertisement
Heat Controller
CAUTION!
Please pay special attention to the following during the connection to avoid the malfunction of the air
conditioning unit due to electromagnetic interference.
Separate the signal and communication lines of the wired remote controller from the power.
j
cord and connection lines between the indoor and outdoor unit, with a minimum interval of 8", otherwise
the communication of the unit will probably work abnormally.
If the air conditioning unit is installed where it is vulnerable to electromagnetic interference, the signal and
k
communication lines of the wired remote controller must be the shielded twisted pair lines.
4.3 Dismantling of the Wired Remote Controller
B-VFH-1 Multi-Zone Wireless / Wired Remote Control
Fig. 16
15
Advertisement
Table of Contents
